|
|
| Part: M100QFR26C-QF-ZL-SD |
1 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
100-pins |
| Package-tip-to-tip: |
17.6x23.6mm |
| Package-pin-pitch: |
0.65mm |
| Price: |
$424.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 100-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 100-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 100QFR26-SD) can be ordered at any time. |
| [Photos] |
| Part: M100QFR26D-QF-ZL-SD |
2 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
100-pins |
| Package-tip-to-tip: |
16.0x22.0mm |
| Package-pin-pitch: |
0.65mm |
| Price: |
$424.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 100-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 100-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 100QFR26-SD) can be ordered at any time. |
| [Photos] |
| Part: M100QFS20-QF-ZL-SD |
3 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
TQFP |
| Package-pin-count: |
100-pins |
| Package-tip-to-tip: |
16.0mm |
| Package-pin-pitch: |
0.5mm |
| Price: |
$488.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 100-TQFP packages. This logic analyzer adapter replaces the TQFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 100-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 100QFS20-SD) can be ordered at any time. |
| [Photos] |
| Part: M160QFS26A-QF-ZL-SD |
4 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
160-pins |
| Package-tip-to-tip: |
31.2mm |
| Package-pin-pitch: |
0.65mm |
| Price: |
$472.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 80-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 80-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 160QFS26-SD) can be ordered at any time. |
| [Photos] |
| Part: M32QFS31-QF-ZO-SD |
5 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
32-pins |
| Package-tip-to-tip: |
9.0mm |
| Package-pin-pitch: |
0.8mm |
| Price: |
$256.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 44-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 32-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 32QFS31-SD) can be ordered at any time. |
| [Photos] |
| Part: M44QFS31A-QF-ZL-SD |
6 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Package-tip-to-tip: |
12.0mm |
| Package-pin-pitch: |
0.8mm |
| Price: |
$325.00 |
| Availability: |
call |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 44-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 44-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 44QFS31-SD) can be ordered at any time. |
| [Photos] |
| Part: M44QFS31C-QF-ZL-SD |
7 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Package-tip-to-tip: |
12.6mm |
| Package-pin-pitch: |
0.8mm |
| Price: |
$325.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 44-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 44-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 44QFS31-SD) can be ordered at any time. |
| [Photos] |
| Part: M64QFR39A-QF-ZL-SD |
8 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
64-pins |
| Package-tip-to-tip: |
17.2x23.2mm |
| Package-pin-pitch: |
1.0mm |
| Price: |
$350.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 64-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 64-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 64QFR39-SD) can be ordered at any time. |
| [Photos] |
| Part: M64QFR39B-QF-ZL-SD |
9 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
QFP |
| Package-pin-count: |
64-pins |
| Package-tip-to-tip: |
17.9x23.9mm |
| Package-pin-pitch: |
1.0mm |
| Price: |
$350.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 64-QFP packages. This logic analyzer adapter replaces the QFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 64-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 64QFS39-SD) can be ordered at any time. |
| [Photos] |
| Part: M64QFS20-QF-ZL-SD |
10 of 19 |
News Flash |
| Products: |
QFP-TQFP-Pin-Monitors |
| Package-type: |
TQFP |
| Package-pin-count: |
64-pins |
| Package-tip-to-tip: |
12.0mm |
| Package-pin-pitch: |
0.5mm |
| Price: |
$395.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Logic analyzer adapter for 64-TQFP packages. This logic analyzer adapter replaces the TQFP package on the pads on the target and accepts the same package. Single-in-line test and monitoring pins on the perimeter of the adapter are numbered. The adapter utilizes 64-pin hinge-lid ZIF test socket from Yamaichi. The socket is replaceable without soldering. The adapter has a two-part construction. The bottom part with male pins and the footprint not larger than the package itself (base), replaces the package on the pads. The top part has matching, 500 mil high, female connector with footprint slightly smaller than the package. Adapters with higher (up to 2 inches high) female connectors can be ordered. Additional bases (part number 64QFS20-SD) can be ordered at any time. |
| [Photos] |
|
|
logic-analyzer-adapter.com 
